Search results for "WATER TREATMENT PLANTS"
showing 10 items of 14 documents
A comprehensive assessment of energy efficiency of wastewater treatment plants: An efficiency analysis tree approach
2023
Producción Científica
Application of the General Model "Biological Nutrient Removal Model No.1" to upgrade two full-scale WWTPs
2012
In this paper, two practical case studies for upgrading two wastewater treatment plants (WWTPs) using the general model BNRM1 (Biological Nutrient Removal Model No. 1) are presented. In the first case study, the Tarragona WWTP was upgraded by reducing the phosphorus load to the anaerobic digester in order to minimize the precipitation problems. Phosphorus load reduction was accomplished by mixing the primary sludge and the secondary sludge and by elutriating the mixed sludge. In the second case study, the Alcantarilla WWTP, the nutrient removal was enhanced by maintaining a relatively low dissolved oxygen concentration in Stage A to maintain the acidogenic bacteria activity. The VFA produce…
Microplastics in water, from treatment process to drinking water: analytical methods and potential health effects
2022
[Aim]: The commonly used analytical methods for microplastic (MPs) detection in drinking water and the threat of MP pollution in water intended for human consumption to human beings are presented through a systematic review. Furthermore, MP occurrence, transport, and fate from raw to treated drinking water, tap water, and bottled water, as well as the possible health impacts of MPs on human beings, are also evaluated. [Methods]: Systematic review included articles published in scientific journals that contain specific keywords in the title and were searched in Web of Science (WOS) and Scopus. The literature was selected and extracted by two reviewers based on the PRISMA-A guidelines, which …
DSC: software tool for simulation-based design of control strategies applied to wastewater treatment plants.
2011
This paper presents a computer tool called DSC (Simulation based Controllers Design) that enables an easy design of control systems and strategies applied to wastewater treatment plants. Although the control systems are developed and evaluated by simulation, this tool aims to facilitate the direct implementation of the designed control system to the PC of the full-scale WWTP (wastewater treatment plants). The designed control system can be programmed in a dedicated control application and can be connected to either the simulation software or the SCADA of the plant. To this end, the developed DSC incorporates an OPC server (OLE for process control) which facilitates an open-standard communic…
Productivity of wastewater treatment plants in the Valencia Region of Spain
2017
Abstract This study analyses the evolution of productivity over the 2008–2012 period for a homogenous set of 199 wastewater treatment plants that are located in the Valencia Region of Spain and utilize the same treatment technology, using the smoothed bootstrap Malmquist productivity index based on Data Envelopment Analysis (DEA). The results reveal a negative trend in productivity that is mainly the result of resource management rather than an inappropriate level of innovation or use of new technologies. In addition, the effect of exogenous factors on productivity is analysed using the Kruskal-Wallis (KW) test, finding that productivity levels were affected by the quality of the influent w…
Application of the Morris method for screening the influential parameters of fuzzy controllers applied to wastewater treatment plants
2011
In this paper,we evaluate the application of a sensitivity analysis to help fine-tuning a fuzzy controller for a biological nitrogen and phosphorus removal (BNPR) plant. TheMorris Screeningmethod is proposed and evaluated as a prior step to obtain the parameter significance ranking. First, an iterative procedure has been performed in order to find out the proper repetition number of the elementary effects (r) of the method. The optimal repetition number found in this study (r = 60) is in direct contrast to previous applications of the Morris method, which usually use low repetition number, e.g. r = 10 ~ 20. Working with a non-proper repetition number (r) could lead to Type I error (identify…
Toward a New Plant-Wide Experimental and Modeling Approach for Reduction of Greenhouse Gas Emission from Wastewater Treatment Plants
2019
Mechanisms causing greenhouse gas (GHG) emission in wastewater treatment plants are of great interest among researchers, encouraging the development of new methods for wastewater management. Wastewater treatment plants (WWTPs) emit three major greenhouse gases during the treatment processes: CO2, CH4, and N2O. Additional amounts of CO2 and CH4 are produced during energy consumption, which can be considered an indirect source of GHGs. Recently, several efforts have been undertaken to assess GHGs from WWTPs, with particular attention paid to the N2O assessment due to its high warming potential (300 times stronger than CO2). This study proposes an integrated model platform for WWTP simulation,…
A new plant wide modelling approach for the reduction of greenhouse Gas emission from wastewater treatment plants
2017
Recent studies about greenhouse gas (GHG) emissions show that sewer collection systems and wastewater treatment plants (WWTPs) are anthropogenic GHG potential sources. Therefore, they contribute to the climate change and air pollution. This increasing interest towards climate change has led to the development of new tools for WWTP design and management. This paper presents the first results of a research project aiming at setting-up an innovative mathematical model platform for the design and management of WWTPs. More specifically, the study presents the project’s strategy aimed at setting-up a plant-wide mathematical model which can be used as a tool for reducing/controlling GHG from WWTP.…
Suspected-screening assessment of the occurrence of organic compounds in sewage sludge
2021
The profiling of emerging organic pollutants present in sludge and generated during wastewater treatment is much more limited than in water. This is mainly due to the difficulty of sludge analysis because of its high content of organic matter and interfering compounds. In this study, a generic extraction method using a mixture of buffered water (pH 4.1) and solid phase extraction (SPE) clean-up was applied to samples of sludge obtained in different treatment plants. This extraction was followed by determination of the contaminants by ultra-high performance liquid chromatography coupled to high resolution mass spectrometry (UHPLC-HRMS), using suspected screening to detect the most relevant o…
Micropollutants removal in an anaerobic membrane bioreactor and in an aerobic conventional treatment plant
2012
The paper expresses an attempt to tackle the problem due to the presence of micropollutants in wastewater which may be able to disrupt the endocrine system of some organisms. These kinds of compounds are ubiquitously present in municipal wastewater treatment plant (WWTP) effluents. The aim of this paper is to compare the fate of the alkylphenols-APs (4-(tert-octyl)) phenol, t-nonylphenol and 4-p-nonylphenol and the hormones (estrone, 17ß-estradiol and 17¿-ethinylestradiol) in a submerged anaerobic membrane bioreactor (SAMBR) pilot plant and in a conventional activated sludge wastewater treatment plant (CTP). The obtained results are also compared with the results obtained in a previous stud…